Powder coated
Made in Minnesota from medium density fiberboard (MDF), a wood composite material with excellent acoustic properties. Durable powder coat finish. Available in five colors.
Solid wood
Natural hardwood plinth in your choice of solid (not veneer) black walnut or white oak with a durable satin finish. Harvested from sustainably managed forests in the USA. Wood's natural variation is part of its distinctive beauty. The grain pattern, color, and texture of each plinth is unique.
The platter is the spinning surface that your record sits on. It plays a large role in maintaining speed consistency and preventing unwanted vibrations from reaching your stylus.
Basic
Made in Minnesota from medium density fiberboard (MDF), a wood composite material with excellent acoustic properties. Grooved platter for easy belt installation and use. Textured black powder coat finish. Felt platter mat included.
Acrylic
Superior speed consistency and playback clarity. Our frosted acrylic platter is precision machined in Massachusetts for ultimate flatness and virtually zero runout. Acrylic is remarkably effective at minimizing unwanted vibrations thanks to its high density and low stiffness. Grooved platter for easy belt installation and use. Felt platter mat included.
Cue Lever
Our silicone-damped Cue Lever helps you safely and precisely cue your records. Use the stainless steel lever to raise and lower the stylus or pause a record. It lowers the tonearm gently to protect your stylus. Also available as an upgrade to install at home.
None
No built-in preamp. Your turntable needs to be connected to either (a) an amplifier or powered speakers with a clearly labeled “phono” input or (b) an external phono preamp like this.
Built-in
Our built-in Pluto 2 Phono Preamp lets you connect your turntable directly to an amplifier or powered speakers. No additional equipment or cables needed. Pluto 2 combines elegant circuit design with high-quality components, and features a subsonic filter, dual gain stages, and a bypass switch. It’s also available as an external preamp.
Cartridges translate information contained within a record’s grooves into an audio signal. All our cartridge options are moving magnet (MM) and come with a diamond-tipped stylus (needle).
Audio-Technica AT91B
The AT91B is an excellent entry-level moving magnet cartridge. It features an aluminum cantilever, and delivers good musical detail with a slightly bright edge. The AT91B has a conical stylus, which somewhat limits trackability and playback resolution.
Ortofon OM5E
Built in Denmark, the Ortofon OM5E is known for its balanced and neutral sound profile. It’s a great choice for listeners who enjoy a wide variety of genres. The OM5E's elliptical diamond stylus gives it an edge over the AT91B when it comes to tracking accuracy and overall clarity.
Grado Green3
Grado cartridges have been hand-assembled in Brooklyn, NY since 1953. The Green3 features a unique 3-piece cantilever and twin-magnet system with proprietary Flux-Bridger generator, which is capable of higher resolution than standard moving magnet generators. These distinctive features give the Green3 its signature warm sound and impactful bass.
Ortofon 2M Red
The 2M Red is a versatile cartridge that has earned an excellent reputation among reviewers and everyday listeners. It features a more sophisticated generator and higher output level than its predecessor, the OM5E. The 2M Red engine features Ortofon’s signature split pole pins for extremely flat frequency response.
Ortofon 2M Blue
The 2M Blue delivers exceptional detail with very little distortion. It’s set apart by its highly polished nude elliptical stylus, which is shaped from a single diamond and pressed directly into the cantilever. This advanced single-piece stylus construction results in lower tip mass, which improves resolution and dynamics.
Iso-Level Feet
Aluminum feet with Sorbothane for advanced vibration isolation. Prevents unwanted vibration from reaching the stylus, so you hear the most subtle details of your music with total clarity. Adjustable-height design lets you precisely level your turntable using the included bubble level. Also available as an upgrade to install at home.
Manual
Change speeds (33/45 RPM) by moving the belt from one pulley groove to the other.
Electronic
Change speeds (33/45 RPM) with the turn of a knob. Our advanced motor controller ensures pinpoint speed accuracy by using a sine wave generator that monitors and adjusts speed thousands of times per second.
Orbit Custom
If you are using a screen reader, please call 781-451-1445 to build and order an Orbit Custom.
Order with confidence.
Orders $99+ ship free
Designed and assembled in Woburn, MA.
Don’t love it? No problem.
Built for you
More options than ever before.
Build your perfect turntable. Choose your finish, cartridge, speed control, platter, and more.
Introducing Orbit Arm 3
Designed to make audiophile-grade playback more accessible. One-piece armtube for exceptionally low resonance. Molded in the USA from magnesium, a strong yet lightweight material with superior vibration damping properties. Precision gimbal bearing design allows the stylus to move freely – eliminating distortion and capturing more musical detail. Adjustable stainless steel counterweight and internal anti-skate. Ready to play out of the box with pre-installed cartridge.
One-piece tapered design for low resonance.
Learn more about the options.
Installed for easy tonearm operation.
Choose your speed control
Manually change speeds (33/45 RPM) by moving the belt from one pulley groove to the other. Or upgrade to electronic speed control to change speeds with the turn of a knob. Our advanced motor controller ensures pinpoint speed accuracy by using a sine wave generator that monitors and adjusts speed thousands of times per second.
All-new design for improved durability and performance.
Turn knob to change 33/45 RPM.
Choose your platter
Our basic platter is made from medium density fiberboard (MDF), a wood composite material with excellent acoustic properties. For improved speed consistency and more musical detail, upgrade to our frosted acrylic platter. Acrylic is great for minimizing unwanted vibrations thanks to its high density and low stiffness. It’s precision machined for flatness and virtually zero runout.
Improved speed consistency and lower resonance.
Stable, low-noise, and maintenance-free.
Add a built-in preamp
Optional built-in phono preamp lets you connect to your favorite components. Featuring Pluto 2 technology with low-noise circuitry and high quality components like WIMA film capacitors and precision resistors.
Add Iso-Level Feet
For advanced vibration isolation, add our new Iso-Level Feet. Constructed out of aluminum and layered with Sorbothane to prevent unwanted vibration from reaching the stylus – so you hear your music with total clarity. Adjustable-height design lets you precisely level your turntable using the included bubble level.
Orbit Custom in action
Features
OA3 Tonearm
Molded magnesium armtube with fixed anti-skate and preset counterweight
Cartridge
5 options available
Optional Cue Lever
For easy tonearm operation
Motor
Low-noise AC synchronous
Speed control
Manual or electronic
Drive Belt
Seamless silicone
Inverted main bearing
Self-lubricating polymer bearings with stainless steel shaft
Platter
Grooved MDF or acrylic
AC Adapter
RCA Cables
Orbit Custom
Dust Cover
Felt Mat
Specifications
| Playback speeds | 33/45 RPM |
|---|---|
| Dimensions | 16.75 x 12.5 x 4.25" |
| Wow & flutter | < 0.175% |
| S/N Ratio | - 79 dBA |
| Rumble | < -63 dBA |
| Input voltage | 115V/60Hz |
| Output connection | RCA |
| Warranty | 3-year limited warranty |
⚠️ WARNING: This product can expose you to chemicals including DEHP, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Compare Models
Powder coated
Made in Minnesota from medium density fiberboard (MDF), a wood composite material with excellent acoustic properties. Durable powder coat finish. Available in five colors.
Solid wood
Natural hardwood plinth in your choice of solid (not veneer) black walnut or white oak with a durable satin finish. Harvested from sustainably managed forests in the USA. Wood's natural variation is part of its distinctive beauty. The grain pattern, color, and texture of each plinth is unique.
The platter is the spinning surface that your record sits on. It plays a large role in maintaining speed consistency and preventing unwanted vibrations from reaching your stylus.
Basic
Made in Minnesota from medium density fiberboard (MDF), a wood composite material with excellent acoustic properties. Grooved platter for easy belt installation and use. Textured black powder coat finish. Felt platter mat included.
Acrylic
Superior speed consistency and playback clarity. Our frosted acrylic platter is precision machined in Massachusetts for ultimate flatness and virtually zero runout. Acrylic is remarkably effective at minimizing unwanted vibrations thanks to its high density and low stiffness. Grooved platter for easy belt installation and use. Felt platter mat included.
Cue Lever
Our silicone-damped Cue Lever helps you safely and precisely cue your records. Use the stainless steel lever to raise and lower the stylus or pause a record. It lowers the tonearm gently to protect your stylus. Also available as an upgrade to install at home.
None
No built-in preamp. Your turntable needs to be connected to either (a) an amplifier or powered speakers with a clearly labeled “phono” input or (b) an external phono preamp like this.
Built-in
Our built-in Pluto 2 Phono Preamp lets you connect your turntable directly to an amplifier or powered speakers. No additional equipment or cables needed. Pluto 2 combines elegant circuit design with high-quality components, and features a subsonic filter, dual gain stages, and a bypass switch. It’s also available as an external preamp.
Cartridges translate information contained within a record’s grooves into an audio signal. All our cartridge options are moving magnet (MM) and come with a diamond-tipped stylus (needle).
Audio-Technica AT91B
The AT91B is an excellent entry-level moving magnet cartridge. It features an aluminum cantilever, and delivers good musical detail with a slightly bright edge. The AT91B has a conical stylus, which somewhat limits trackability and playback resolution.
Ortofon OM5E
Built in Denmark, the Ortofon OM5E is known for its balanced and neutral sound profile. It’s a great choice for listeners who enjoy a wide variety of genres. The OM5E's elliptical diamond stylus gives it an edge over the AT91B when it comes to tracking accuracy and overall clarity.
Grado Green3
Grado cartridges have been hand-assembled in Brooklyn, NY since 1953. The Green3 features a unique 3-piece cantilever and twin-magnet system with proprietary Flux-Bridger generator, which is capable of higher resolution than standard moving magnet generators. These distinctive features give the Green3 its signature warm sound and impactful bass.
Ortofon 2M Red
The 2M Red is a versatile cartridge that has earned an excellent reputation among reviewers and everyday listeners. It features a more sophisticated generator and higher output level than its predecessor, the OM5E. The 2M Red engine features Ortofon’s signature split pole pins for extremely flat frequency response.
Ortofon 2M Blue
The 2M Blue delivers exceptional detail with very little distortion. It’s set apart by its highly polished nude elliptical stylus, which is shaped from a single diamond and pressed directly into the cantilever. This advanced single-piece stylus construction results in lower tip mass, which improves resolution and dynamics.
Iso-Level Feet
Aluminum feet with Sorbothane for advanced vibration isolation. Prevents unwanted vibration from reaching the stylus, so you hear the most subtle details of your music with total clarity. Adjustable-height design lets you precisely level your turntable using the included bubble level. Also available as an upgrade to install at home.
Manual
Change speeds (33/45 RPM) by moving the belt from one pulley groove to the other.
Electronic
Change speeds (33/45 RPM) with the turn of a knob. Our advanced motor controller ensures pinpoint speed accuracy by using a sine wave generator that monitors and adjusts speed thousands of times per second.
| Product |
 Orbit Basic
|
 Orbit Plus
|
 Orbit Special
|
 Orbit Custom
|
 Orbit Theory
|
|---|---|---|---|---|---|
| Finish options | |||||
| Speed Control | Manual | Manual | Electronic | Manual or Electronic | Electronic |
| Platter | MDF | Machined Acrylic | Machined Acrylic | MDF or Acrylic | Machined Acrylic |
| Tonearm | OA3 | OA3 | OA3 | OA3 | OA3 Pro |
| Cartridge | Audio-Technica AT91B | Ortofon OM 5E | Ortofon 2M Red | 5 options | Ortofon 2M Blue or Bronze |
| Cue lever | Available separately | Available separately | Included | Optional | Included |
| Built-in preamp | Optional | Optional | Optional | Optional | Optional |
| Feet | Rubber | Rubber | Rubber | Iso-Level or Rubber | Iso-Level |
| Motor | Standard | Standard | Standard | Standard | Ultra-quiet |
| Price | $249+ | $399+ | $549+ | $249+ | $999+ |
| Links to product pages |